Partition Recovery Tools

How to Recover RAID 5 Data?

RAID is the technology to store data on the computer. This combines the hard disks into a single logical unit. There are different RAID technologies like RAID 0, RAID 1, RAID 5 and so on. Each technology has its advantages and drawbacks. RAID 5 is the most commonly used storage technology as it suits the most of the requirements of the data storage on the computer. The data is divided into strips and saved on the hard disks. This increases the speed performance of the computer.

At times you might lose the data from the hard disks. You might have tried rebuilding the RAID array on your computer if you are a tech savvy. The hard drive is strained in this process. At times it leads to the failure of the RAID array rebuild. You had not taken the backup of the confidential data on your computer. In such situation, you can recover the files on the computer using RAID partition recovery software. Partition Recovery Tools help you to get back the files from the RAID 5 array efficiently.

Few severe data loss conditions from RAID 5 array of the computer:

The RAID array can be recovered using the recovery software in the following loss scenarios. Make sure that the RAID array is intact before using recovery software. Otherwise it is not possible to get back your data out of the array.

File System corruption: The File System of the hard disk of the computer gets corrupted sometimes for reasons like, virus infection, improper handling of the system and so on. In such situation, you will lose the access to the files on the computer. In such cases you can recover the files by scanning the RAID 5 array.

RAID controller failure: The RAID 5 array will be controlled by the mechanical hardware in the computer. The RAID controller may fail at times to make your data inaccessible. You will lose your precious data on it. In such circumstances, you need recovery software to get back recovery software. Partition Recovery Tools is one of the reliable recovery tools which you can use.

Frequent system reboots: The system might reboot several times damaging your RAID 5 parameters. In such situation, you will face huge data loss situation. You might not be having the backup also. In that case, you have to scan the RAID 5 array using recovery software. Partition Recovery Tools help you to get back the files on the computer.

RAID 5 array re-initialization: When the firmware up gradation fails, then the RAID array re-initializes. The array might also get re-initialized on the computer by operation error by the user. In such situation, you can recover the files on the RAID array by scanning it using recovery software. Partition Recovery Tools is the most effective recovery tools that can be used.

Prominent features of Partition Recovery Tools:

The Partition Recovery Tools help you to recover data from RAID 5 array efficiently. The software gets you back files of different file types on the RAID array. You can recover data from corrupted partition on Windows 7, Windows 8, Windows Vista and Windows XP using the software. The software has lots of advantageous features and you can even scan the RAID 0 and RAID 1 array based systems. You can get back data from laptops hard drive also. Get more information about it by clicking here. The easy-to-use interface of the tool allows any amateur user to get back the files without any guidance from data recovery experts. The Mac version of this tool has the potential to retrieve data from corrupt HFS+ partition on all the latest Mac operating system versions such as Mac OS X, 10.5 X and above. Try the demo version of the software to have the practical recovery experience.

Simple steps to recover data from RAID 5 array using Partition Recovery Tools:

Step 1: Download the software and install it on the computer. Select the "Recover Partitions / Drives" option from the main screen of the software. Then click on "Partition Recovery" from the next screen.

Recover data from RAID 5 array - Select Partition Recovery

Fig A: Select Partition Recovery

Step 2: Select the RAID partition on the software and click on "Next". The drive will be scanned and for the data.

Recover data from RAID 5 array - Select the drive

Fig B: Select the drive

Step 3: After scanning, the result will be displayed on the screen. You can preview the files and save them on the computer.

Recover data from RAID 5 array - Recovered Files and Folders

Fig C: Recovered Files and Folders

For Leopard (10.5) and
Snow Leopard (10.6) Users

For Lion (10.7), Mountain Lion (10.8),
Mavericks and Yosemite (10.10) Users